Exterior window surround with aligned sill – Model B

An assembly for finishing a window opening on the outside, with a head piece, two side pieces and a sill. On Model B, the edges of the sill are aligned with the outer edges of the frame, forming one continuous outline. Dimensions and decor are adapted to the window frames and the facade.

Compact HPL, 8 mm, 45° corners, reveals and sill joined with an open L joint, visible black core. Front frame of about 5 cm, customisable from a minimum of 3 cm; sill front of about 3.5 cm. For exterior use we use HPL intended for this application, with UV protection.

Length, height, reveal depth and frame width are set after measurement. The sill is aligned with the outer edges of the frame. Options: back routing, 28 mm nominal thermal insulation and pre-compressed sealing tape. The sill slope is set for each project.

Exterior decors with UV protection; we choose the decor together and confirm it in the quote.

Delivered in four pieces or pre-assembled. maxCL alignment and fixing system. Exterior fixing and sealing are decided according to the substrate and the project.